High Adhesion Polyethylene Modified Bitumen Adhesive Tape
The polyethylene anti-corrosion bitumen tape is a cold applied tape used for the corrosion protection of oil ,gas ,and water underground or overhead steel pipeline and waterproofing for the roof, tank ,culverts etc. It is also called polyethylene anti-corrosion asphalt tape....
High Adhesion Polyethylene Modified Bitumen Adhesive Tape is a cold applied tape used for the corrosion protection of oil ,gas ,and water underground or overhead steel pipeline and waterproofing for the roof, tank ,culverts etc. It is also called polyethylene anti-corrosion asphalt tape.
The XUNDA liquid adhesive can be used as primer for this tape. The liquid adhesive represent an anti corrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the polyethylene anti-corrosion bitumen tape to the pipe .
The composition of the pipe wrap tape - polyethylene bitumen tape (asphalt tape) consists of three layers, asphalt butyl adhesive layer and film backing, interleaving
Adhesive : Bituminous butyl compound
Film Backing: Special blend of stabilized polyethylene
Interleaving: Silicone coated separator sheet
Easy to apply by hand.
Excellent resistance to soil stress
Excellent resistance to vapor transmission.
Excellent resistance to cathodic disbondment.
Good conformability and consistent uniform thickness.
Waterproof for the basement, bridges ,roof etc.
Meets ASTM D 1000 、EN 12068、AWWA C214
and other international standard.
＜ 5mm radial
Water Vapor Transmission Rate
5℃ - 50℃
Xunda Primer C27
XUNDA polyethylene anti-corrosion bitumen tapes are available in rolls.
Standard Ordering Options
50mm、100mm、150mm or others
10m、30m、50m、100m or others
Black or others
76mm or others
- Previous: Pipeline Bitumen Butyl Anti Corrosion Wrap Tape
- Next: Self Adhesive Polypropylene Mesh Membrane Geotextile Rubberized Bitumen tape