Pipeline Outerwrap 955 for the Underground Water Pipe Anti Corrosion
The XUNDA pipe protection tape is a cold applied tape (is also called mechanical protection tape ) used for the corrosion protection and mechanical protection of oil ,gas ,and water underground or overhead steel pipeline. It is a polyethylene film with a bonding butyl rubber...
The XUNDA pipe protection tape is a cold applied tape (is also called mechanical protection tape ) used for the corrosion protection and mechanical protection of oil ,gas ,and water underground or overhead steel pipeline.
Pipeline Outerwrap 955 for the Underground Water Pipe Anti Corrosion is a polyethylene film with a bonding butyl rubber adhesive ,the adhesive assures a complete bond and eliminates the need for tie-downs on the outerwrap.
The Mechanical Protection Tape shall be applied after the inner pipe anti-corrosion tape by hand or with a pipe wrapping machine.
The composition of the pipe wrap tape - protection tape consists of two layers, butyl rubber adhesive layer and film backing.
Adhesive : Butyl rubber
Film Backing: Special blend of stabilized polyethylene
Mechanical protection of the inner butyl rubber tape.
Excellent adhesion to inner butyl rubber tape and itself.
Can be applied over a wide temperature range.
Good conformability and consistent uniform thickness.
Easily applied with no special equipment.
Compatible with common pipe coatings.
Excellent resistance to cathodic disbondment.
Meets ASTM D 1000 、EN 12068、AWWA C214、
C209 and other international standard.
0.25 in radius(6.4mm)
Water Vapor Transmission Rate
＞2.5 x 1015 ohm.com
5℃ - 50℃
XUNDA pipe protection tapes are available in rolls.
Standard Ordering Options
50mm、100mm、150mm or others
30m、50m、100m or others
White or others
76mm or others
- Previous: Pipeline Joint Wrap Tape for the Corrosion Protection of Field Joints Fitting and Specialty
- Next: Cold Applied White Corrosion Prevention Tape