Pipe Double Layer Tape 934 for the Oil Gas Water Pipeline Rehabilitation
The XUNDA pipe repair tape is a cold applied tape used for the corrosion protection and mechanical protection of field joint, fittings and specialty piping. It is suitable to protect pipe welds. The high adhesion butyl rubber adhesive is suitable during extreme cold weather...
The XUNDA pipe repair tape is a cold applied tape used for the corrosion protection and mechanical protection of field joint, fittings and specialty piping. Pipe Double Layer Tape 934 for the Oil Gas Water Pipeline Rehabilitation is suitable to protect pipe welds. The high adhesion butyl rubber adhesive is suitable during extreme cold weather application.
The pipe repair tape shall be applied by hand or with a pipe wrapping machine.
The composition of the pipe wrap tape - repair tape consists of two layers, butyl rubber adhesive layer and film backing.
Adhesive : Butyl rubber
Film Backing: Special blend of stabilized polyethylene
Cold applied and high tack.
Very useful in extreme cold weather applications.
Can be applied over a wide temperature range.
Good conformability and consistent uniform thickness.
Easily applied with no special equipment.
Compatible with common pipe coatings.
Excellent resistance to cathodic disbondment.
Meets ASTM D 1000 、EN 12068、AWWA C214、
C209 and other international standard.
ASTM D1000 EN12068
0.25 in radius(6.4mm)
Water Vapor Transmission Rate
＞2.5 x 1015 ohm.com
XUNDA pipe repair tapes are available in rolls.
Standard Ordering Options
50mm、100mm、150mm or others
30m、50m、100m or others
Yellow、Black or others
76mm or others
- Previous: Self Adhesive Pipe Double Sided Butyl Rubber Tape
- Next: Pipeline Joint Wrap Tape for the Corrosion Protection of Field Joints Fitting and Specialty