Polyethylene Heat Shrinking Tape for the Pipeline Anti Corrosion
The pipeline heat shrink tape is a wrap around radiation cross linked tape designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. When heated the backing layer shrinks and the adhesive flows and forms a reliable...
Polyethylene Heat Shrinking Tape for the Pipeline Anti Corrosion is a wrap around radiation cross linked tape designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.
The epoxy primer should applied to the prepared pipe surface then heat shrinkable tape is immediately wrapped around the joint over the wet epoxy.
Then center the closure patch on the overlap region.
The pipeline heat shrink tape consists of three layers, primer layer, adhesive layer, film backing.
Primer： Liquid epoxy, solvent free two component.
Adhesive: High shear strength copolymer adhesive
Film backing: Radiation cross linked. High density polyethylene
Excellent resistance to cathodic disbondment.
Long term corrosion protection.
Non hardening and non cracking.
Fast application and high performance.
Excellent chemical resistance
Excellent resistance to shear forces
Mechanical protection and moisture resistance.
Elongation at Break
Hardness, Shore D
1.0 x 1016 ohm.cm
Heat shrinkable Tape
Peel to Steel
Low Temperature Flexibility
DIN EN 12068
DIN EN 12068
Xunda pipeline heat shrink tapes are available in rolls.
Standard Ordering Options
2.0mm、2.5mm or others
450mm、600mm、900mm or others
10m、15m、20m、30m or others
- Previous: Hot Melt Polyethylene Anti-corrosion Tape
- Next: Green Color Viscoelastic Tape for the Steel Pipe Corrosion Protection