Pipeline tape coverage requirements

- Jun 30, 2018 -

The minimum overlap shall not be less than 1 in. (25 mm). When a new roll

of tape is started, the ends shall be overlapped at least 6 in. (150 mm), measured

circumferentially. The overlap shall be smooth and shall be located to ensure the

continuity of the inner-layer coating.

 


Related Industry Knowledge

Related Products

  • Polyethylene Mechanical Anti Corrosion Tape
  • PVC Pipe Butyl Rubber Wrapping Tape
  • Easy Use Solid in Primer for Pipe Anti Corrosion
  • High Adhesion Hot Melt Epoxy Primer
  • Petrolatum Primer for the Marine Pillars Anticorrosion
  • Tape Wrap Machine for the Pipe Anti Corrosion Tape