Visco Elastic Tape for the Pipeline Anticorrosion
The visco-elastic tape (viscoelastic tape) is a non cure, cold applied corrosion prevention wrap adhering extremely well to the plant coating PE, PP, FBE and irregular equipment such as flanges, valves, pipe fittings, rings, manhole etc. Visco-elastic tape can cold flow into...
Visco Elastic Tape for the Pipeline Anticorrosion is a non cure, cold applied corrosion prevention wrap adhering extremely well to the plant coating PE, PP, FBE and irregular equipment such as flanges, valves, pipe fittings, rings, manhole etc.
Visco-elastic tape can cold flow into all irregularities of the substrate and self healing of the complete coating system.
Visco-elastic tape is based on a compound that consisting of non-crystalline, low-viscosity, non-crosslinked ( fully amorphous ), non-reactive polyisobutene.
Inert to ageing and weathering
Constant thickness and conforms to irregular shapes.
Resistance to low temperatures without getting brittle
100% coverage rate, it is completely waterproof and anti corrosion.
Environmentally friendly ,no health and safety hazard to humans
Resistant to many chemicals like water ,salts ,acids .alkalis ,polar solvents etc
Xunda visco-elastic tapes are available in rolls.
Standard Ordering Options
50mm、100mm、150mm or others
10m、15m、20m、30m or others
Green or others
76mm or others
Peel Strength to steel(23℃)
Peel Strength to PE(23℃)
Peel Strength to Steel(-45℃)
Shear Strength to Steel（23℃）
Shear Strength to Steel（-45℃）
Specific Insulation Resistance
ASTM D 570
Drip Resistance @85 ℃ for 72 hours
Heat aging (100d, 90℃)
Chemical Resistance（90d ，10% HCL）
Chemical Resistance （90d，10%NaOH）
Chemical Resistance (90D, 3%NaCL)
Hot water immersion @60℃ for 120 days
Operational Temperature Range
- Previous: Visco Elastic Paste for the Flange Fitting Anti Corrosion
- Next: Visco-elastic Body Adhesive Tape for the Fitting Manhole Anti Corrosion